This is a front aero air splitter for the 3000GT! Made with 1/8" thick aluminum, it replaces the stock plastic under-panels and serves to increase handling and downforce on the front end of the car. The splitter extends about 3 inches out from the lower edge of the front bumper, serving to slice the air just before it hits the front of the car. Air hitting the front of the car goes up and over, through the engine bay, and down and under the car. The splitter BLOCKS that air from turning downward -- that downward moving air hitting the splitter helps add downward force to the front of the car, reducing front end lift and increasing front end traction, and results in LESS air going under the car, which helps with downforce as well. The fact that the splitter extends back about 2 feet resulting in a smooth front undercarriage also helps with the downforce equation (notice that almost all professional high-speed race cars have an underbody that is as smooth as possible and many even run front splitters).
NOTE: This panel replaces your stock plastic undercarriage cover panels.
It also includes a double-reinforced "pad" where an extra layer is welded on BOTH sides where the front center jack point is - the added panels line up it with the stock jack point on the front under cross-member to give extra strength at the jack point. Note... The "pad" is not included on the 91-93 version because the splitter does not cover the jack point on the car.
*** Hardware is not included and most customers use the OEM bolts that are removed from the splash guards. When using the factory hardware the splitter angle will match the bottom of the bumper cover, if you would like to adjust the splitter angle additional hardware will be required.
*Many of our products are in-stock. However, because all of our products are custom fabricated, they may not be immediately available. Products that are not currently stocked may take 3-4 weeks from when your order is placed to when they're available for shipping. If you want to know the availability of this item, please email Sales@Skillard.com.